19D823186 16D823186A 56D823186 Hood Latch: Diagnosis and OE Fitment Guide

QUICK ANSWER

Suspected hood-latch wear, binding or incomplete engagement should be confirmed through physical inspection and the workshop checks appropriate to this component before a replacement part is ordered. The same symptom can have more than one cause, so compare the installed component, all OE references, connections and vehicle information.

WHAT THIS PART DOES

The Hood Latch retains the hood in its closed position and releases it through the vehicle's hood-release mechanism. Its role does not prove that it is the cause of a customer complaint; diagnosis must connect the observed fault to this component.

SYMPTOM SNAPSHOT

• Hood does not latch securely after correct alignment is confirmed
• Release lever movement does not operate the latch normally
• Latch remains stiff or does not return after cleaning and inspection
• Visible latch, spring or cable-attachment damage

These symptoms are diagnostic clues, not a guarantee that this part has failed.

DIAGNOSIS BEFORE ORDERING

1. Keep the vehicle stationary and verify the hood is supported during inspection
2. Inspect latch alignment, striker position and mounting fasteners
3. Check release cable travel and attachment before replacing the latch
4. Clean and inspect the mechanism following vehicle procedures
5. Compare connector, cable attachment and mounting-hole geometry before ordering

OEM REFERENCE

• 19D823186
• 16D823186A
• 56D823186

Every verified OE reference from the product record is retained. Revision letters and alternate numbers must not be discarded during comparison.

VEHICLE APPLICATION REFERENCES

• VOLKSWAGEN Jetta
• VOLKSWAGEN Passat
• VOLKSWAGEN Touran

Model names are reference points only. Production date, engine, market specification and connector changes can affect compatibility.

WHEN REPLACEMENT IS JUSTIFIED

Replacement is reasonable when inspection or workshop testing confirms damage or a functional failure that matches the role of this component. If the evidence conflicts with the product function, continue diagnosis instead of replacing the part.

RELATED PARTS TO INSPECT

• Hood striker and panel alignment
• Release cable, handle and retaining clips
• Latch switch or connector where fitted

VIN CHECK

Confirm fitment using OE number and VIN before ordering.

For fitment questions, share the OEM part number, VIN number, or vehicle information with our team before ordering.

CHECK THE PART AND OE DETAILS

Review 19D823186 / 16D823186A / 56D823186 product images and fitment details.

WORKSHOP AND BULK ORDERS

Repair shops and distributors can send an OE list, quantities and vehicle information for fitment review and bulk-order support.