1K8805567A Lock Carrier Support Bracket: Diagnosis and OE Fitment Guide

QUICK ANSWER

A bent, cracked or displaced front lock-carrier support bracket affecting front-panel or hood-lock alignment should be confirmed through physical inspection and the workshop checks appropriate to this component before a replacement part is ordered. The same symptom can have more than one cause, so compare the installed component, all OE references, connections and vehicle information.

WHAT THIS PART DOES

The Lock Carrier Support Bracket supports and reinforces the front lock-carrier panel so the attached front-end and hood-lock components remain in their specified position. Its role does not prove that it is the cause of a customer complaint; diagnosis must connect the observed fault to this component.

SYMPTOM SNAPSHOT

• Support bracket is visibly bent, cracked, corroded through or torn around a mounting hole
• Lock-carrier position remains displaced after adjacent panels and fasteners are inspected
• Hood-lock alignment cannot be set because the supporting front structure is deformed
• Uneven front-panel gaps or component contact is traced to movement at this bracket

These symptoms are diagnostic clues, not a guarantee that this part has failed.

DIAGNOSIS BEFORE ORDERING

1. Support the hood and front-end components safely before loosening structural fasteners
2. Measure panel, lock-carrier and hood-lock alignment before removing the bracket
3. Inspect the bracket folds, mounting holes, welds or fasteners for impact deformation, cracking and elongation
4. Check the lock carrier, hood lock, bumper reinforcement, radiator supports and adjacent body mounting points for collision movement
5. Compare the stamped profile, hole pattern, relief cut-out, coating, OE suffix and VIN before ordering

OEM REFERENCE

• 1K8805567A

Every verified OE reference from the product record is retained. Revision letters and alternate numbers must not be discarded during comparison.

OE-SPECIFIC BUYING CHECK

• Volkswagen parts-catalog positioning and specialist dismantler references identify 1K8805567A as a front lock-carrier or radiator-support reinforcement bracket for specified Scirocco applications, not the hood-lock mechanism itself.
• The reference part is a black pressed-steel support with a raised upper channel, central circular opening, large lower relief cut-out and multiple mounting holes; compare the complete stamped geometry and hole locations before ordering.
• A hood that will not latch still requires separate checks of the hood lock, striker, release cable, hinges and panel alignment; replace this support only when deformation, cracking, corrosion or mounting displacement is confirmed.
• Confirm production date, collision-repair history, front-panel configuration and VIN because catalog descriptions vary between lock-carrier support, front-panel reinforcement and radiator-support bracket.

VEHICLE APPLICATION REFERENCES

• VOLKSWAGEN Scirocco

Model names are reference points only. Production date, engine, market specification and connector changes can affect compatibility.

WHEN REPLACEMENT IS JUSTIFIED

Replacement is reasonable when inspection or workshop testing confirms damage or a functional failure that matches the role of this component. If the evidence conflicts with the product function, continue diagnosis instead of replacing the part.

RELATED PARTS TO INSPECT

• Front lock-carrier panel and radiator mounting points
• Hood lock, striker and panel-gap alignment
• Bumper reinforcement and adjacent body structure

VIN CHECK

Confirm fitment using OE number and VIN before ordering.

For fitment questions, share the OEM part number, VIN number, or vehicle information with our team before ordering.

CHECK THE PART AND OE DETAILS

Review 1K8805567A product images and fitment details.

WORKSHOP AND BULK ORDERS

Repair shops and distributors can send an OE list, quantities and vehicle information for fitment review and bulk-order support.