1T0823301 1T0823301E 1T0823302 1T0823302E Hood Hinge Left and Right Pair: Diagnosis and OE Fitment Guide

QUICK ANSWER

Suspected hood-hinge bending, pivot wear or confirmed hood-alignment error should be confirmed through physical inspection and the workshop checks appropriate to this component before a replacement part is ordered. The same symptom can have more than one cause, so compare the installed component, all OE references, connections and vehicle information.

WHAT THIS PART DOES

The Hood Hinge Left and Right Pair supports the hood through its opening arc and maintains the panel position relative to the body and hood-lock system. Its role does not prove that it is the cause of a customer complaint; diagnosis must connect the observed fault to this component.

SYMPTOM SNAPSHOT

• Hood sits unevenly after latch and rubber-stop adjustment are checked
• Hinge arm or mounting flange is visibly bent, cracked or distorted
• Excessive hinge-pivot movement is confirmed during supported inspection
• Hood opening movement binds because the hinge geometry is damaged

These symptoms are diagnostic clues, not a guarantee that this part has failed.

DIAGNOSIS BEFORE ORDERING

1. Support the hood securely before loosening or inspecting hinge fasteners
2. Measure panel gaps and compare both sides before assigning the fault to a hinge
3. Inspect the hood panel, body mounting surface, striker, latch and rubber stops for accident deformation or incorrect adjustment
4. Check hinge pivots, mounting holes and fasteners for wear, cracks or movement
5. Confirm left and right OE numbers, revision suffixes, hole pattern, arm geometry and VIN before ordering

OEM REFERENCE

• 1T0823301
• 1T0823301E
• 1T0823302
• 1T0823302E

Every verified OE reference from the product record is retained. Revision letters and alternate numbers must not be discarded during comparison.

OE-SPECIFIC BUYING CHECK

• Volkswagen body-parts references identify the 1T0823301 family as the left hood hinge for specified Touran and Caddy applications.
• Volkswagen catalog references identify 1T0823301E as a left-side hood-hinge revision for specified Touran and Caddy applications.
• Later suffix references depend on market, production date and vehicle configuration; do not infer interchangeability from the suffix alone.
• Volkswagen body-parts references identify the 1T0823302 family as the right hood hinge paired with the left 1T0823301 family.
• Catalog and body-panel references identify 1T0823302E as the right-side counterpart to left-side 1T0823301E.
• Confirm that the listing contains both sides and compare pivot design, mounting holes, panel geometry, market specification and VIN before ordering.

VEHICLE APPLICATION REFERENCES

• VOLKSWAGEN Caddy
• VOLKSWAGEN Touran

Model names are reference points only. Production date, engine, market specification and connector changes can affect compatibility.

WHEN REPLACEMENT IS JUSTIFIED

Replacement is reasonable when inspection or workshop testing confirms damage or a functional failure that matches the role of this component. If the evidence conflicts with the product function, continue diagnosis instead of replacing the part.

RELATED PARTS TO INSPECT

• Hood panel and body mounting surfaces
• Hood latch, striker and rubber adjustment stops
• Fenders, cowl alignment and hinge fasteners

VIN CHECK

Confirm fitment using OE number and VIN before ordering.

For fitment questions, share the OEM part number, VIN number, or vehicle information with our team before ordering.

CHECK THE PART AND OE DETAILS

Review 1T0823301 / 1T0823301E / 1T0823302 / 1T0823302E product images and fitment details.

WORKSHOP AND BULK ORDERS

Repair shops and distributors can send an OE list, quantities and vehicle information for fitment review and bulk-order support.